MTZ Tractor Talk

General Talk => Off Topic => Topic started by: Administrator on December 18, 2014, 02:43:32 PM

Title: Posting photos/videos
Post by: Administrator on December 18, 2014, 02:43:32 PM
Publishing materials on a forum could get a bit tricky, and this tutorial is intended to show you how to insert photos and videos into you post.

We'll start from the videos, because that is the easy part:

Videos
This forum allows you to post videos from Youtube and Vimeo using the (http://www.mtzequipment.com/forum/Themes/Lucid_Dreams_v2/images/bbc/youtube.gif) and (http://www.mtzequipment.com/forum/Themes/Lucid_Dreams_v2/images/bbc/vimeo.gif) buttons in the post editor.
To publish a video, simply copy the link from Youtube/Vimeo and paste it into the editor. Then, highlight the link and click the (http://www.mtzequipment.com/forum/Themes/Lucid_Dreams_v2/images/bbc/youtube.gif) or (http://www.mtzequipment.com/forum/Themes/Lucid_Dreams_v2/images/bbc/vimeo.gif) button. You're done!

Photos
1. If you are posting a photo from another website, all you have to do is copy and paste the link to that photo into the editor. Then, highlight the link and click the (http://www.mtzequipment.com/forum/Themes/Lucid_Dreams_v2/images/bbc/img.gif) button in the post editor.

2. If you want to upload a photo, click on "Attachments and other options" below the editor, under "Attach" click "Browse..." and select the photo you wish to upload. Each photo you upload will appear under the text of your post as thumbnails. By clicking on the thumbnails, the photos will expand to their full size.

If you would like the photos to appear inside your post, you can do that in the following way:
First, repeat the procedure under point 2 above.
Next, click the "Post" button.
Right click on the thumbnail of the photo and select "Copy Link Location" in Firefox or "Copy" in Internet Explorer.
Select "Modify"in the upper right corner of the post.
Go to the location in your post where you want the photo to appear and paste it there.
Click "Save Settings" in the bottom right corner to save your changes.
You're done!

If you have any questions or require additional help, please reply to this post.
Title: how to translate to english
Post by: imperial1960 on January 04, 2015, 07:27:39 PM
[youtube]https://www.youtube.com/watch?v=FpBg04y_drI[/youtube] [youtube]https://www.youtube.com/watch?v=sJfmn4bjBlE[/youtube]
Title: Re: Posting photos/videos
Post by: arie515 on January 09, 2015, 07:39:03 PM
Good videos.
Both dealing with hydraulic distributor assembly.
The lower video does not need much translation. The guy is a "strong, silent type" - does not talk much.


The upper video - if you have particular questions, I can translate, let me know what segment of the video you need translation (minute, second)
Yours,
Arie
Title: Re: Posting photos/videos
Post by: imperial1960 on January 20, 2015, 09:25:45 PM
On the lower vidio right at the first its showing what looks like 1/8 inch x 10inch plastic guide rods! Are these rods required where doing reseal?
Title: Re: Posting photos/videos
Post by: damengineer on March 19, 2015, 12:58:15 AM
This looks like what i have on my 825.  I would also like to know what the rods/wires are sticking out of the valve cartridges.  Are they used to hold the cartridge together??
Title: Re: Posting photos/videos
Post by: arie515 on March 19, 2015, 09:06:54 AM
T I would also like to know what the rods/wires are sticking out of the valve cartridges.  Are they used to hold the cartridge together??
I'm not a technical expert, but I speak the language. The video is about 10 minutes long. Let me know at what time do you see those rods/wires ? and I'll try to translate.