• Home
  • Search
    •  
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: MT3-82 driving front axle mounting pivot pins  (Read 129 times)

arie515

  • Administrator
  • Jr. Member
  • *****
  • Posts: 86
  • Karma: +0/-0
  • new member
    • View Profile
    • MTZ Equipment Ltd.
Re: MT3-82 driving front axle mounting pivot pins
« Reply #2 on: April 24, 2020, 04:00:35 PM »
Not sure if this helps.
But if you will need it, we stock original factory parts, including 52-2301058-A
Call parts manager Ray to order 1-855-246-4689 x211

Arie

Davey 8V71

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • new member
    • View Profile
MT3-82 driving front axle mounting pivot pins
« Reply #1 on: April 21, 2020, 07:20:05 PM »
MT3-82 with a driving steer axle. The nut that holds the pitman arm to the bottom of the sector shaft for the steering gear has come loose. The threaded end of the sector shaft is buggered up, but looks to be salvage-able. The driving steer axle is close enough to keep the nut captured. I am unsure if the smart move is to pull the pins and drop the steer axle down for access with the tractor supported... -or- unhook everything from the power steering group and pull it out.

  I favor dropping the axle for access. The pins appear to be hollow and threaded, for pulling.

My question... the pins have the part number 52-2301058-A according to the parts information I have. In the parts book they are called "swing axle". Does anyone know with certainty what size bolt and correct thread pitch these pins have?? Is there a puller group made for pulling these pins?? they appear to go into blind holes from both ends.
  Thank you for any information!!
Dave
  • MT3-82