• Home
  • Search
    •  
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: 825 cold start - Flame Starter/Glow Plug  (Read 5375 times)

sd825

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
  • new member
    • View Profile
Re: 825 cold start - Flame Starter/Glow Plug
« Reply #3 on: March 12, 2020, 04:04:59 PM »
This is great! Thanks for sharing. Where did you get the thermostart?
  • 825

rockyroad

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
  • new member
    • View Profile
Re: 825 cold start - Flame Starter/Glow Plug
« Reply #2 on: January 10, 2020, 01:59:19 PM »
Hi, I know this is an old thread but thought further info might help others.
I could not get the flamestarter to work on my tractor either. I think it was faulty. I appears that you have to provide power to the heater first then once the heater is hot apply power to the solenoid that allows the diesel fuel to run down on to the heated element. The wiring in my tractor for the flamestarter had been butchered before I got it, and 1 relay was missing so never figured out how the control mechanism for this worked.
As a result I swapped the flamestarter for a much simpler mechanism called a thermostart.
See my youtube video linked here that shows how I did it. [size=78%]https://www.youtube.com/watch?v=bJPEfQvWhAI&t=3s[/size]
  • Belarus BX70 a.k.a. 572

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Karma: +0/-0
    • View Profile
825 cold start - Flame Starter/Glow Plug
« Reply #1 on: December 01, 2014, 12:32:12 AM »

Does anyone know the secret to get these things to function?  I've had mine off a few times, checked it over, tried it on the bench and it works.  It gets hot and fuel will drip down onto the heater element and smoke.  But it doesn't make any flame.

I tested on the tractor too, it's drawing current when the switch is applied and when the starter cranks it supplies power to the smaller gauge wire which allows fuel to drip onto the element. 
I figured they work or don't and burn out???  Or do they get weak/tired and don't get hot enough to make a flame. 

Many tractor brands use this same system and same sort of glow plug/ thermo start plug that heats up/burns diesel in the intake manifold. My other tractor has one and it works real good. I don't expect it to start when its -20c with not being plugged in.  I plug it in always when its cold out but when its between +5c and -5c it would be handy if the thing worked.
  • Tractors- '93 Belarus 825 with loader and others...