• Home
  • Search
    •  
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: Hydraulic lines for snow blade on bucket  (Read 4598 times)

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Hydraulic lines for snow blade on bucket
« Reply #4 on: March 17, 2016, 03:35:25 PM »
Thanks again for getting back to me, I think I have my gears all in order now, the latest copy of manual show it good. Would you know how or were I could get a copy of the manual for 572?


The MTZ website has ones you can download .  Or you can order one from a local dealer or just order one online.



Now for my loader, I have an allied loader 594 and I am attaching a 7 1/2 angle blade to the bucket . I have the allied joy stick for bucket controls but need contol lines and levers for angle ( the up and down is controled with bucket joy stick. On my tracktor there is 3 levers on right side of dash, the far right controls my 3 point hitch and other to I dont know. If they are hydralic controls , could I use then to anle the blade, if so were do I hook onto them. Thanks again for your help. Jerry




Okay then you have lots of remotes to choose from if you already have a loader joy stick and aux.  valve block added on.  You have 2 more remote valves built into the tractor controlled by the levers on the right side of the dash. There are pipes running to the back of the tractor and to just in front of the cab down by hydraulic reservoir on the left and right sides.   Maybe there are quick couplers already threaded in on the back??  If so just run your hoses back there for the angle control on the blade. Then one of the levers by the dash will control it.
« Last Edit: March 17, 2016, 03:46:12 PM by Haymaker »
  • Tractors- '93 Belarus 825 with loader and others...

Jerry

  • Newbie
  • *
  • Posts: 12
  • Country: ca
  • new member
    • View Profile
Re: Hydraulic lines for snow blade on bucket
« Reply #3 on: March 16, 2016, 01:36:58 PM »
Thanks again for getting back to me, I think I have my gears all in order now, the latest copy of manual show it good. Would you know how or were I could get a copy of the manual for 572?
Now for my loader, I have an allied loader 594 and I am attaching a 7 1/2 angle blade to the bucket . I have the allied joy stick for bucket controls but need contol lines and levers for angle ( the up and down is controled with bucket joy stick. On my tracktor there is 3 levers on right side of dash, the far right controls my 3 point hitch and other to I dont know. If they are hydralic controls , could I use then to anle the blade, if so were do I hook onto them. Thanks again for your help. Jerry
  • Belarus 572

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Hydraulic lines for snow blade on bucket
« Reply #2 on: March 16, 2016, 12:06:59 PM »
Okay so you already have a loader on the tractor??  Does it have a joystick in the cab to operate the loader or do you use the levers up the dash on the right to lift the loader and tilt the bucket?   With a hyd. angle blade you need 3 remotes or a dual circuit valve  where you flick a switch or push a button to operate the 3rd function. 
  • Tractors- '93 Belarus 825 with loader and others...

Jerry

  • Newbie
  • *
  • Posts: 12
  • Country: ca
  • new member
    • View Profile
Hydraulic lines for snow blade on bucket
« Reply #1 on: March 16, 2016, 08:12:21 AM »
Hi
I am installing a hydraulic angle snow blade on my allied loader on a Belarus 572 and need 2 hydraulic line for power angle with controls. Were is the best location and method of doing this. Can I run from the 2 remotes at the back and do the 2 levers on the right side of the dash operate these remotes, or is there a beter method of doing the with quick connect couplings. Thanks Jerry
  • Belarus 572