• Home
  • Search
    •  
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: Newbe  (Read 10748 times)

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Newbe
« Reply #11 on: March 20, 2015, 08:41:12 AM »
Where did you buy the valve body kit?Maybe this summer you could post a vidio that is in english!Thanks
I got mine through my local Belarus dealer it was $25.
  • Tractors- '93 Belarus 825 with loader and others...

damengineer

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 58
  • Country: us
  • new member
    • View Profile
    • That Dam Engineer LLC
Re: Newbe
« Reply #10 on: March 20, 2015, 02:10:26 AM »
I got my kit from parts for Belarus.com.  However, Arie515 tells me that we can get the original parts from MTZ equipment.  As difficult as it is to get to the valve, I would want to use the best parts available.    I can always get seals from Sealco  (www.sealcompany.com ) here, but there is usually a wait for the oddball stuff. 
  • MTZ 1220 w/ Kr-34 loader, Belarus 8345 w/ Koyker loader, Belarus 825 w/ Memo loader, White 2-105, Case 1270,
If your not leading the pack, the view is always the same!!

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Newbe
« Reply #9 on: March 19, 2015, 07:03:47 PM »
Where did you buy the valve body kit?Maybe this summer you could post a vidio that is in english!Thanks
Belarus 562 4x4 russian loader bucket

damengineer

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 58
  • Country: us
  • new member
    • View Profile
    • That Dam Engineer LLC
Re: Newbe
« Reply #8 on: March 19, 2015, 12:37:02 AM »
My 1996 825 leaks from the hyd valve body.  It looks like a 2 day job for me.  I bought the kit to rebuild it and I think I can find it after 2 years, but getting into the cab after removing all the panels around the steering wheel is somewhat difficult.  I weigh over 300lbs and have a bad back causing me to have to wear a leg brace.  I cannot stand for more than 10 minutes at a time...  hopefully I will get it rebuilt this summer.  If you guys have any pointers I would certainly appreciate a heads up.
  • MTZ 1220 w/ Kr-34 loader, Belarus 8345 w/ Koyker loader, Belarus 825 w/ Memo loader, White 2-105, Case 1270,
If your not leading the pack, the view is always the same!!

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Newbe
« Reply #7 on: February 03, 2015, 12:10:40 PM »
All you new members start posting about your Belarus Tractors
Belarus 562 4x4 russian loader bucket

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Newbe
« Reply #6 on: December 03, 2014, 12:23:42 AM »
Well just find a Belarus/mtz dealer near by if you don't like buying online as there is several online companies in the USA that sell Belarus parts.  Just go to  the http://www.mtzequipment.com/ website and check the dealer locator. They seem to be setting up new dealers across north America every month it seems like.  They sell parts for stuff from the 1970's to the new ones out now. Really parts are a non issue with these things.  MTZ/Belarus probably have a better part supply on 30 old tractors then the big domestic companies as not only do they source the common wear stuff they also have all the odd ball stuff as well.   Just people don't know who or where to go to get them it seems.
  • Tractors- '93 Belarus 825 with loader and others...

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Newbe
« Reply #5 on: December 02, 2014, 10:43:54 PM »
Leaks a bunch while parked seems not to leak while hot.I dont mind doing this job just not sure who to get parts from I dont want tiwan parts.Nomore ebay for me
Belarus 562 4x4 russian loader bucket

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Newbe
« Reply #4 on: December 02, 2014, 10:13:42 PM »
Well if the cab is built like my 1993 825 you service it from under the steering wheel.  There are 3 panels that come off and the floor boards all come out to gain access to the hyd. pump and valve body.  A fair bit of stuff to tear out to get to it and yeah those lines are a pain to take off but its doable. Guess it depends on how much its .... leaking.
  • Tractors- '93 Belarus 825 with loader and others...

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Newbe
« Reply #3 on: December 02, 2014, 09:42:29 PM »
On my spool valve at the bottom there are bunch of 10mm bolts with rubber boots on each lower spool valve control this is where the oil leaks from the rubber boots.Most spool valves I have seen use close tolerance in the spool to control oil leakage. This distributor valve looks like a bear to remove its bolted to the tank surounded by steel pipes but looks like i can access it from the bottom but not sure if this is correct way to attack this.
Belarus 562 4x4 russian loader bucket

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Newbe
« Reply #2 on: December 02, 2014, 08:16:05 PM »
You can buy a whole reseal kit for that valve body, I got one on last winter from my local dealer it was only like 27 bucks.   I was looking at the valve body and I think it would be best to just take it right off the and do it on the bench.   Wash it off good and see if you can see where it's leaking1st.  I found a copper washer that was defective and leaking on a banjo fitting on the valve body.   That made a huge difference but the valve body still sweats oil and should be resealed.  My loader has a separate set of spool valves plumbed into the hydraulic system which are operated by a joy stick.  So these get used the most and they don't leak.
  • Tractors- '93 Belarus 825 with loader and others...

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Newbe
« Reply #1 on: December 02, 2014, 06:33:59 PM »
Finnaly found a Belarus site hope info and parts are still avail.I own a 562 4-wheel drive had it since new in 1989 I think.This tractor has been goog to me all these years Im now fixing it up.My next project is fixing hydralic oil leaks at the bottom of the distributor that controls the hydralic lift of the bucket.Anyone know if I can reseal distributor on the tractor by removing the 10mm bolts and plate?
Belarus 562 4x4 russian loader bucket