• Home
  • Search
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: 100 model clutch  (Read 5286 times)


  • Newbie
  • *
  • Posts: 2
  • Country: by
  • new member
    • View Profile
    • mytraktor.by
Re: 100 model clutch
« Reply #3 on: March 30, 2016, 03:55:45 PM »

Hi, I do not speak English, so I help Google.
If you have a tractor MTZ-100, I clutch the clutch has to be like a clutch of modern tractor BELARUS-1025. The site of the plant must be manual.
Driven wheels on MTZ-1025 set the short sides of the hub to each other.

After installation, the clutch on the flywheel, you must adjust the position of squeezing levers and adjust the mechanism of abduction the middle disc.

After all the adjustments, it would be nice to check the clutch with the special tool and elongated bolts on correct assembly and operation.


  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: 100 model clutch
« Reply #2 on: March 19, 2016, 07:42:12 AM »
I would think there is only one way it would fit together??? Post a pick if you can. There are  some manuals on the mtz site also you can upload be it service or even a parts manual to look at pictures.   Maybe not an old 100 but a newer version with the that hp and clutch style with 2 discs like the 1220 series.

Hey does that have the 24 speed partial powershift trans in it?
« Last Edit: March 19, 2016, 07:59:24 AM by Haymaker »
  • Tractors- '93 Belarus 825 with loader and others...


  • Newbie
  • *
  • Posts: 1
  • Country: ca
  • new member
    • View Profile
100 model clutch
« Reply #1 on: March 18, 2016, 10:50:59 PM »
Changing the clutch out on my 1988 100 Belarus, the unit has two fiber discs and wondering if anyone knows which way they need to be installed.  The hub sticks out farther on one side on each disc.  Thanks
  • 800 420 100