• Home
  • Search
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: 825 reducer jumps out of low  (Read 1593 times)


  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 58
  • Country: us
  • new member
    • View Profile
    • That Dam Engineer LLC
Re: 825 reducer jumps out of low
« Reply #3 on: March 28, 2018, 04:47:56 PM »
My 825 will not engage in the lower speed reducer  if there is some dirt under the pedal.  There must be some adjustment.   Those are spur gears in there also, so there is not a side thrust on the gears.
  • MTZ 1220 w/ Kr-34 loader, Belarus 8345 w/ Koyker loader, Belarus 825 w/ Memo loader, White 2-105, Case 1270,
If your not leading the pack, the view is always the same!!


  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: 825 reducer jumps out of low
« Reply #2 on: March 23, 2018, 12:27:28 PM »
I don't hardly ever use that reducer pedal on the floor on mine.  But i'd start off checking that pedal is making a full travel both ways as dirt can get jammed in there over time especially if not used much.  IF its free and goes in both directions properly check the linkage under the cab. Shift it into low and go look and see if the linkage is indeed travelling all the way it should be. Maybe there is some adjustment.  That's where I'd start.
  • Tractors- '93 Belarus 825 with loader and others...

Shiloh sharps

  • Newbie
  • *
  • Posts: 11
  • Country: ca
  • new member
    • View Profile
825 reducer jumps out of low
« Reply #1 on: March 21, 2018, 02:38:57 AM »
My 93 825 has the reducer pedal on the floor. This winter when snow blowing the pedal started jumping out of low when under load... pedal stays in high no problem but as soon as I get a load on the tractor it jumps out of low.
Anyone ever have this happen before? Any ideas what might be going on?
Any help is always appreciated. .