• Home
  • Search
    •  
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: Gear reduction starter  (Read 8397 times)

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Gear reduction starter
« Reply #10 on: December 14, 2014, 11:11:05 PM »
See coolant heater post
  • Tractors- '93 Belarus 825 with loader and others...

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Gear reduction starter
« Reply #9 on: December 12, 2014, 11:31:13 AM »
Haymaker do you have a picture of the water heater showing direction of flow? Thanks
Belarus 562 4x4 russian loader bucket

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Gear reduction starter
« Reply #8 on: December 11, 2014, 08:57:15 PM »
I use  0W-40 in my Belarus too typically as it really helps with cranking speed and getting oil pressure in a hurry in sub zero weather.  15F is not too cold it should start pretty easy if you have a good block heater.  I have a 1500 watt circulating heater on mine and it gets the block real warm.  I've started it outside down to -30C (with synthetic oil) no problem.  Takes a while till everything warms up though!!   Typically I don't like to do that and park it inside if I know I have to use it when its real cold as the hydraulics are real stiff at that temp when its sitting in the cold.
  • Tractors- '93 Belarus 825 with loader and others...

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Gear reduction starter
« Reply #7 on: December 09, 2014, 05:47:41 PM »
Ihave checked all cable connections plus the neg shut off switch.I have 12.8 (new batteries) and while cranking in cold weather 15degree with the hydraulic kicked out volts drop to 7.5.It will start but to me its sounds like the starter turns to slow.I have shell rotella oil-5-40 and use a block heater.Now in warm weather volts drop to 10 volts my thinking is the gear reduction that offered online would spin motor faster.I also have a different fuel filter setup(case loader type)and while changing fuel filter i direct the fuel away from the starter so I know it not fuel soaking the starter.I will take your advice again and look inside the starter before I buy a new one.Thanks again Haymaker
Belarus 562 4x4 russian loader bucket

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Gear reduction starter
« Reply #6 on: December 08, 2014, 10:11:14 PM »
Heck over the years on the net I've seen a Delco starter retro fits for these Belarus Tractors too.  There are millions of them built where many parts  are interchangeable between many years and models.  So i'm sure you're going to find a few options out there.  But personally I think the simplest thing would be just to insure your stock one is working correctly as you mentioned you have only 500 hrs on this machine.  

When you say voltage drop what are you referring to?  The voltage your batteries drop too while cranking?  Or did you perform an actual voltage drop test on your positive and negative starting circuits with a volt meter to check for resistance issues in the cables and contections??

I guess the best would be to see what your actual cranking RPM is or post a video for us to see/hear.  
  • Tractors- '93 Belarus 825 with loader and others...

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Gear reduction starter
« Reply #5 on: December 08, 2014, 09:51:14 PM »
Thats good to know thanks
Belarus 562 4x4 russian loader bucket

arie515

  • Administrator
  • Jr. Member
  • *****
  • Posts: 74
  • Country: ca
  • new member
    • View Profile
    • MTZ Equipment Ltd.
Re: Gear reduction starter
« Reply #4 on: December 08, 2014, 08:15:30 PM »
Anyone know if this starter will fit my 562 and do they last?
If no one answers that, call Ray at parts department 1-855-2GO-4MTZ (1-855-246-4689) x222, or email him spares@mtzequipment.com  He should be able to help.
From what I know Chinese starters will fit, but will last few months at best. Factory original starter are a bit more expensive, but last for years.

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Gear reduction starter
« Reply #3 on: December 08, 2014, 11:21:29 AM »
New batterys did volts drop test -7.0 so I was thinking the gear reduction will spin it over faster for cold weather
Belarus 562 4x4 russian loader bucket

Haymaker

  • Global Moderator
  • Full Member
  • *****
  • Posts: 228
  • Country: ca
    • View Profile
Re: Gear reduction starter
« Reply #2 on: December 04, 2014, 08:09:53 PM »
Anyone know if this starter will fit my 562 and do they last?

Yes I believe they do but what's wrong with your stock one???  Mine has 1000's of hrs on it and it works fine still. What wears out on them is the starter drive though. You can get them from Belarus though, they sell brushes and what not for the starter too.
  • Tractors- '93 Belarus 825 with loader and others...

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Gear reduction starter
« Reply #1 on: December 03, 2014, 05:38:37 PM »
Anyone know if this starter will fit my 562 and do they last?
Belarus 562 4x4 russian loader bucket