• Home
  • Search
    •  
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: Posting photos/videos  (Read 10411 times)

arie515

  • Administrator
  • Jr. Member
  • *****
  • Posts: 78
  • Country: ca
  • new member
    • View Profile
    • MTZ Equipment Ltd.
Re: Posting photos/videos
« Reply #6 on: March 19, 2015, 09:06:54 AM »
T I would also like to know what the rods/wires are sticking out of the valve cartridges.  Are they used to hold the cartridge together??
I'm not a technical expert, but I speak the language. The video is about 10 minutes long. Let me know at what time do you see those rods/wires ? and I'll try to translate.

damengineer

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 58
  • Country: us
  • new member
    • View Profile
    • That Dam Engineer LLC
Re: Posting photos/videos
« Reply #5 on: March 19, 2015, 12:58:15 AM »
This looks like what i have on my 825.  I would also like to know what the rods/wires are sticking out of the valve cartridges.  Are they used to hold the cartridge together??
  • MTZ 1220 w/ Kr-34 loader, Belarus 8345 w/ Koyker loader, Belarus 825 w/ Memo loader, White 2-105, Case 1270,
If your not leading the pack, the view is always the same!!

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
Re: Posting photos/videos
« Reply #4 on: January 20, 2015, 09:25:45 PM »
On the lower vidio right at the first its showing what looks like 1/8 inch x 10inch plastic guide rods! Are these rods required where doing reseal?
Belarus 562 4x4 russian loader bucket

arie515

  • Administrator
  • Jr. Member
  • *****
  • Posts: 78
  • Country: ca
  • new member
    • View Profile
    • MTZ Equipment Ltd.
Re: Posting photos/videos
« Reply #3 on: January 09, 2015, 07:39:03 PM »
Good videos.
Both dealing with hydraulic distributor assembly.
The lower video does not need much translation. The guy is a "strong, silent type" - does not talk much.


The upper video - if you have particular questions, I can translate, let me know what segment of the video you need translation (minute, second)
Yours,
Arie

imperial1960

  • Full Member
  • ***
  • Posts: 148
  • Country: us
  • member
    • View Profile
how to translate to english
« Reply #2 on: January 04, 2015, 07:27:39 PM »
Belarus 562 4x4 russian loader bucket

Administrator

  • Administrator
  • Newbie
  • *****
  • Posts: 22
  • Country: ca
    • View Profile
    • MTZ Equipment Ltd.
Posting photos/videos
« Reply #1 on: December 18, 2014, 02:43:32 PM »
Publishing materials on a forum could get a bit tricky, and this tutorial is intended to show you how to insert photos and videos into you post.

We'll start from the videos, because that is the easy part:

Videos
This forum allows you to post videos from Youtube and Vimeo using the and buttons in the post editor.
To publish a video, simply copy the link from Youtube/Vimeo and paste it into the editor. Then, highlight the link and click the or button. You're done!

Photos
1. If you are posting a photo from another website, all you have to do is copy and paste the link to that photo into the editor. Then, highlight the link and click the button in the post editor.

2. If you want to upload a photo, click on "Attachments and other options" below the editor, under "Attach" click "Browse..." and select the photo you wish to upload. Each photo you upload will appear under the text of your post as thumbnails. By clicking on the thumbnails, the photos will expand to their full size.

If you would like the photos to appear inside your post, you can do that in the following way:
First, repeat the procedure under point 2 above.
Next, click the "Post" button.
Right click on the thumbnail of the photo and select "Copy Link Location" in Firefox or "Copy" in Internet Explorer.
Select "Modify"in the upper right corner of the post.
Go to the location in your post where you want the photo to appear and paste it there.
Click "Save Settings" in the bottom right corner to save your changes.
You're done!

If you have any questions or require additional help, please reply to this post.
« Last Edit: December 18, 2014, 02:52:35 PM by Administrator »