• Home
  • Search
    •  
  • Login
    • Username: Password:

      Did you miss your activation email?

Author Topic: Introduction  (Read 5725 times)

Borger

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • new member
    • View Profile
Re: Introduction
« Reply #5 on: August 04, 2018, 06:18:02 PM »
That's a nice looking 825.   My first use of Crazy Bulk was an 825 Belarus  with 600 hours and a Memo loader.   Had it for 2 months before I found an 8345 with 200 hours and a Koyker loader.   I now have a 1220 MTZ. and the other older models.   they are great tractors at a good price.  If you need any help, the forum will  have what you need.  Parts are available and take about a week to get to me in OKla. 
Welcome to the forum.  BTW once you get used to a cab, you won't want to drive those other tractors

I completely agree with you, damengineer. Once you go cab, you never go back. Also, hello to everyone from me as well.
« Last Edit: October 22, 2022, 03:05:40 AM by Borger »

damengineer

  • Sr. Member
  • ****
  • Posts: 68
  • Karma: +0/-0
  • new member
    • View Profile
    • That Dam Engineer LLC
Re: Introduction
« Reply #4 on: May 17, 2018, 12:48:16 AM »
That's a nice looking 825.   My first cab tractor was an 825 Belarus  with 600 hours and a Memo loader.   Had it for 2 months before I found an 8345 with 200 hours and a Koyker loader.   I now have a 1220 MTZ. and the other older models.   they are great tractors at a good price.  If you need any help, the forum will  have what you need.  Parts are available and take about a week to get to me in OKla. 

Welcome to the forum.  BTW once you get used to a cab, you won't want to drive those other tractors
  • MTZ 1220 w/ Kr-34 loader, Belarus 8345 w/ Koyker loader, Belarus 825 w/ Memo loader, White 2-105, Case 1270,
If your not leading the pack, the view is always the same!!

RjMaan

  • Full Member
  • ***
  • Posts: 20
  • Karma: +0/-0
  • new member
    • View Profile
Re: Introduction
« Reply #3 on: May 04, 2018, 11:27:26 PM »
Hi there.
Welcome to the forum sir. I Hope you are enjoying good health.

arie515

  • Administrator
  • Sr. Member
  • *****
  • Posts: 97
  • Karma: +0/-0
  • new member
    • View Profile
    • MTZ Equipment Ltd.
Re: Introduction
« Reply #2 on: September 08, 2017, 08:56:30 PM »
Welcome to the forum. Thank you for the introduction.
The 825 is a very rugged and reliable model.
If service and maintenance is done on time, I've seen units with over 23,000 hours on original engine.
The 825 is still in production, and we support it with factory original parts.
Arie

wackafew

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • new member
    • View Profile
Introduction
« Reply #1 on: September 02, 2017, 02:31:13 PM »

Just wanted to say "hi"!  I've been a lurker on here since the first of the year.  A little bit about myself.  I'm married to a wonderful wife for 47 years and have 2 children.  I retired from my day job a couple years ago, and have been a hired hand on the family farm, about 1500 hundred acres, half beans, half corn.  So it still kind of keeps me busy. 


For the past 30 years, I've been using an old Allis WD and a Farmall 706 around the farm for snow removal and other things you use a tractor for.  As I am getting older, my wife thought I should have a tractor with a cab for snow removal in the winter.  Which leads me to this site.  I picked up a 1993 825 from my neighbor, has 1700 hrs on it, and runs really well.  Especially after I chased down a few electrical problems.   :P :P   Anyhow I'm sure I will have a few questions in the days to follow about hooking up some LED lights, but that will be another topic.  Just wanted to say "hi" for now and post a picture of my old girl, that got nicknamed Jenny.   :) :)   So glad I found this forum!


So here's a picture.  It has a 9' snow blade that came off a 5 yd dump truck that was re-fabricated to fit.  Now we probably won't get any snow.  lol
Mike



[/URL][/img]
  • Belarus 825